Dr. Brown’s Insta-Feed Baby Bottle Warmer and Sterilizer for Baby Bottles and Baby Food Jars

Very easy and quick
This product is super quick at heating bottles and only has one button- very simple.My baby is exclusively bottle fed so we do get quite a bit of use out of this bottle warmer. I love that it is so simple. You just measure a small amount of PURIFIED water in the bottom and press the button and it is done in about a minute or so. It must be purified water or else you will get buildup in the machine and it will be disgusting and not work correctly.Now I will say, whoever made this did not try to use it with a crying baby in tow. It is almost impossible to pour the water in the measuring cup while holding a baby and even harder if that baby is moving and upset. The little measuring cup cannot be set on the counter or anything, it is rounded on the bottom so you must be holding the bottle of PURIFIED water and the cup, one in each hand.You do need to use some trial and error with the amount of PURIFIED water you use, for us the numbers in the chart made the bottle too hot. It also gets too hot if you forget about it and leave the bottle in the machine for longer than you meant to when the cycle is up.Oh and did I mention you must use purified water!

Hazardous steam heat
I cannot for the life of me understand the overwhelming majority of reviews that gloss over how dangerous and wildly ineffective this product is. I purchased it to use with the wide Dr Browns 5 oz glass bottles hoping to warm premade formula and breast milk stored in the fridge a little faster than a hot water bath. On first opening I was surprised to find instructions that detailed heating times only for a narrow range of liquid amounts and bottle sizes. Note this product seems like it will not fit a bottle larger than 5 oz. If you’re in the newborn phase where your baby is cluster feeding in smaller amounts than the full bottle you will be playing a game of chicken as you try and find the correct amount of water to add to the steam reservoir to not end up with a scalding liquid. Most times the bottle will still be painfully hot to remove even with the basket included as the handle is short and fits very close to the bottle for the wide sizes. The insert for the basket also requires some more potential for burning as you have to apply significant force to put the bottle into the basket and pull to remove the bottle as well. While you’re fumbling around trying to make this work you will notice that the small insert for measuring water does not rest flat on any surface and is set into the body of the device such that you end up spilling a fair amount of water. This is annoying because it depletes the distilled water you likely use to make your bottles and sterilization work and adds clean up time. You will likely end up using an alternative measurement method as small differences (I.e. 2mL) in the water level will result in substantial temperature increases.While this device can heat your bottles to warm very quickly you will end up having to wait half the time for the bottle to cool from molten lava temperatures to grab the bottle. In the end you might try to brute force this to work for you, often times burning yourself just to end up waiting to cool a bottle twice the time it takes to heat up water in a microwave and dunk a bottle in it to heat. If you’re like me you’re more likely to let it sit in a corner gathering dust and look for an alternative that doesn’t involve burning yourself or wasting your precious time.

Compact and easy to use!
I bought this warmer along with the bottle sterilizer, and it’s been an excellent purchase. I keep both in the same room as my newborn daughter, and in just two to three minutes, I have a bottle ready at the ideal temperature. The warmer’s operation is simple: add water using the dispenser, depending on the amount of liquid and the type of bottle (glass or plastic). Press the single button. It then begins to heat the water. Just wait until it turns off automatically to check the temperature of the liquid.Please note that the manufacturer suggests the amount of water to add depending on the type of bottle and the amount of liquid to be heated, but this is not universal as it will depend on various factors, such as: heating a bottle that has been kept at low temperatures will be different than heating the same bottle that has just come out hot from the bottle dryer. The amount of water added will influence the final temperature; heating a 4-ounce bottle with 4 ml of water is not the same as heating the same 4-ounce bottle with 12 ml of water. Remember that the greater the amount of water, the higher the temperature reached by the heater. Please check the temperature of the liquid before feeding your little one. Another important point is to use 100% distilled water to avoid crusts and impurities in the heater. I have been using it for two weeks and the evaporating surface remains as clean as the first day of use. If you do not have distilled water, the manufacturer recommends cleaning it with a mixture of water and white vinegar from time to time.

American plug point – if you are ordering in the UK Amazon it should be clear if it won’t fit in the mains here

خطيرة وسيئة لما تجي تسخن الحليب الموية اللي في الجهاز تدفق في كل مكان خطير وانتبهو